36 Menu operation
Advanced Color
Settings
(Continued)
Saturation is the amount of that color in a video picture. Lower settings produce less
saturated colors; a setting of “0” removes that color from the image entirely. If the
saturation is too high, that color will be overpowering and unrealistic.
• Brilliant Color
This feature utilizes a new color-processing algorithm and system level enhancements to
enable higher brightness while providing truer, more vibrant colors in picture. It enables a
greater than 50% brightness increase in mid-tone images, which are common in video and
natural scenes, so the projector reproduces images in realistic and true colors. If you
prefer images with that quality, select a desired level.
• Light Source Mode
Selects a suitable light source power from among the provided modes. See
Extending light source life on page 52.
• Custom Brightness
You can adjust the light source brightness. This function is only available
when Light Source Mode is Custom.
• HDR Brightness
The projector can automatically adjust the brightness levels of your image
according to the input source. You can also manually select a brightness
level to display better picture quality. When the value is higher, the image
becomes brighter; when the value is lower, the image becomes darker.
• Noise Reduction
Reduces electrical image noise caused by different media players
Reset Current
Picture Mode
Returns all of the adjustments you’ve made for the selected Picture Mode
(including the preset mode, User1 and User2) to the factory preset values.
1. Press OK. The confirmation message is displayed.
2. Use / to select Reset and press OK. The current picture mode
returns to the factory preset settings.
The following settings will still remain: Picture Mode, Load Settings From.
To Next Page
