To Next PageTo Next PageWhat to do if BenQ W700 Projector remote control does not work?
If the BenQ Projector's remote control isn't working, first, replace the battery with a new one. If that doesn't solve the problem, check for any obstacles between the remote and the projector and remove them. Finally, make sure you're within 7 meters (23 feet) of the projector.
How to fix BenQ W700 Projector that does not turn on?
If your BenQ Projector doesn't turn on, ensure the power cord is securely plugged into both the projector's AC inlet and a working power outlet. If the outlet has a switch, make sure it's on. Also, if you've recently tried turning it on, wait for the cooling process to complete before attempting to power it on again.
Why is there no picture on my BenQ Projector?
If there is no picture on your BenQ Projector, first, ensure that the video source is turned on and correctly connected. Next, verify that the projector is correctly connected to the input signal device. Finally, select the correct input signal using the SOURCE key on the projector or remote control.
How to fix blurred image on BenQ Projector?
If the image on your BenQ Projector is blurred, adjust the focus of the lens using the focus ring. Additionally, ensure that the projector and the screen are properly aligned by adjusting the projection angle, direction, and height of the unit if necessary.
General| Number of colors | 1.073 billion colors |
|---|---|
| Native aspect ratio | 16:9 |
| Projection distance | - m |
| Vertical scan range | 48 - 120 Hz |
| Horizontal scan range | 31 - 90 kHz |
| Projection technology | DLP |
| Supported aspect ratios | - |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | 26 - 300 \ |
| Projector native resolution | WXGA (1280x720) |
| Keystone correction, vertical | ± 40 ° |
| Offset | 136 % |
| Throw ratio | 1.54 - 1.71:1 |
| Zoom capability | Yes |
| Focal length range | 24.34 - 25.95 mm |
| Aperture range (F-F) | 2.52 - 2.73 |
| Lamp power | 190 W |
| Light source type | Lamp |
| Service life of light source | 4500 h |
| Service life of light source (economic mode) | 6000 h |
| DVI port | No |
| HDMI version | 1.3 |
| Audio (L/R) in | 2 |
| USB connector type | Mini-USB B |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 1 |
| Ethernet LAN (RJ-45) ports | 0 |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC, PAL, SECAM |
| Supported graphics resolutions | 1280 x 720 (HD 720), 1600 x 1200 (UXGA), 640 x 480 (VGA) |
| RMS rated power | 10 W |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | Black, White |
| Market positioning | Home cinema |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 260 W |
| Noise level | 31 dB |
| Preset modes | Bright, Cinema, Custom, Game |
| Noise level (economic mode) | 28 dB |
| On Screen Display (OSD) languages | BUL, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, ITA, JPN, KOR, NOR, POL, POR, RUM, RUS, SWE, THA, TUR |
| Cables included | AC, VGA |
Weight and Dimensions| Depth | 247 mm |
|---|---|
| Width | 330 mm |
| Height | 119.5 mm |
| Weight | 3600 g |
| Package weight | 4900 g |
Specifies the projector models (W700, W710ST) and regions covered.
Provides the manual's version number and revision date.
Advises users to refer to the online version for the latest updates.
Defines technical terms and acronyms used throughout the manual.
Covers critical safety, RoHS, and compliance information for service personnel.
Details essential safety precautions and compliance declarations.
Describes the projector's main systems and functional blocks.
Lists comprehensive specs for electrical, mechanical, optical, and environmental aspects.
Provides specifications for the lamp, brightness, and color coordinates.
Details DMD chip specifications and input/output connectors.
Explains the function of each button on the remote control.
Describes the functions of the projector's physical buttons and status LEDs.
Lists timing parameters for various video inputs like RGB, HDMI, and Component.
Provides projection distances and dimensions for W700 and W710ST models.
Explains how to adjust keystone correction for a rectangular display.
Covers prerequisites and installation of firmware upgrade tools.
Guides through the USB driver installation and verification process.
Details the steps for erasing, upgrading, and validating firmware.
Details the process of changing the projector's splash logo using Flash-Tool.
Explains lamp status messages and replacement alerts for both models.
Step-by-step guide to reset the lamp hour counter after replacement.
Covers unlocking forgotten passwords and accessing security features.
Provides instructions to enter the projector's service mode via keypad or remote.
Details the steps for adjusting the color wheel delay time.
Guides on calibrating VGA and YUV sources.
Explains how to perform the automatic keystone calibration.
Shows a visual breakdown of projector components for identification.
Details steps for removing the lamp module and top cover.
Guides on removing the main board and identifying its connectors.
Covers procedures for removing the optical engine and color wheel assembly.
Provides initial checks for common projector malfunctions before disassembly.
Guides on troubleshooting power, lamp, and display-related errors.
Explains the meaning of different LED patterns for status and errors.
Guides on RS232 connection and Hyper Terminal configuration.
Lists ASCII commands for various projector functions like power, source, and picture settings.
Details commands for controlling projector position and standby settings.
Lists screw types, part numbers, and recommended torque values for assembly.
Shows dimensional drawings for ceiling mount installation.
Identifies the axial and DMD fans within the projector.
