BenQ W1070 User Manual (English)

Other manuals for BenQ W1070

Quick Start Guide33 pages

Datasheet2 pages

Questions and Answers:

D
dustinmclaughlinJul 26, 2025
How to fix BenQ W1070 Projector that does not turn on?
- D
  Dana TuckerJul 26, 2025
  If your BenQ Projector isn't turning on, there could be a few reasons. First, check that the power cable is securely plugged into both the AC inlet on the projector's rear and a functioning power outlet, ensuring the outlet switch is on. Second, if you've recently turned it off, wait for the cooling process to complete before attempting to turn it on again. Lastly, make sure the lamp cover is correctly and securely attached.
J
jeffreycooperJul 31, 2025
What to do if my BenQ W1070 has no picture?
- T
  Thomas SteinJul 31, 2025
  If your BenQ Projector isn't displaying a picture, there are several potential causes. First, ensure that your video source is both turned on and correctly connected. Second, verify that the projector is correctly connected to the input source device. Finally, make sure that you've selected the correct input source using the Source keys on the remote or the SOURCE button on the projector.
J
Jennifer FlowersAug 5, 2025
Why is my BenQ W1070 Projector remote control not working?
- P
  Patrick BrownAug 5, 2025
  If your BenQ Projector remote control isn't working correctly, consider these potential causes: The batteries may be out of power, so replace them with new ones. There might be an obstacle between the remote control and the projector, so remove any obstructions. You might be too far away from the projector; try standing within 8 meters (26.2 feet).
M
megan73Aug 10, 2025
Why is the picture blurred on my BenQ Projector?
- J
  John LamAug 10, 2025
  If the picture on your BenQ Projector appears blurred, it might be due to the projection lens not being correctly focused; try adjusting the focus using the focus ring. Alternatively, the projector and the screen might not be aligned properly, so adjust the projection angle, direction, and height of the projector as needed.
K
kenneth48Aug 15, 2025
Why is the image unstable on my BenQ W1070 Projector?
- M
  Melissa ThorntonAug 15, 2025
  If the image on your BenQ Projector is unstable, it's likely due to the connection cables not being securely connected to the projector or the signal source. Ensure that all cables are correctly connected to the appropriate terminals.
W
williamhuffmanAug 20, 2025
What to do if 3D content does not display correctly on BenQ W1070 Projector?
- D
  denisehigginsAug 20, 2025
  If 3D content isn't displaying correctly on your BenQ Projector, there are several possible reasons. First, the 3D glasses may be out of battery, so recharge them. Second, the settings in the 3D menu might not be set correctly. Third, your Blu-ray Disc may not be in 3D format, so use a 3D Blu-ray Disc. Finally, the input source may not have been correctly selected, so select the correct source using the Source keys on the remote control or the SOURCE button on the projector.

BenQ W1070 Specifications

General

White Brightness	2000 lumens
Native Resolution	1920 x 1080
Contrast Ratio	10, 000:1
Aspect Ratio	16:9
Throw Ratio Range	1.15 - 1.5:1
Keystone Effect	yes
3D	yes
Digital Zoom	yes
USB Ports	1
Video Input	hdmi
Inputs	vga, hdmi, s-video, component video, 3.5mm audio, rca
Remote Control	yes
OS Compatibility	windows

Weight and Dimensions

Depth	9.63 inches
Height	4.13 inches
Width	12.38 inches
Net Weight	6.1 pounds

Summary

Important Safety Instructions

Moisture Condensation

Instructions to prevent damage from temperature changes when moving the projector.

Avoid Volatile Liquids

Precautions against using flammable cleaners or having rubber/plastic contact.

Disposal

Information on environmentally responsible disposal of projector materials.

Overview

Shipping Contents

Lists all items included in the projector package for verification upon purchase.

Replacing Remote Control Batteries

Step-by-step guide for opening the remote, replacing batteries, and closing it.

Remote Control Effective Range

Details on the optimal distance and angle for the remote control to function correctly.

Ceiling Mounting the Projector

Safety advice and recommendations for using a proper BenQ ceiling mount kit.

Projector Exterior View

Front and Upper Side View

Identification of controls, vents, and sensors on the projector's front and top.

Rear and Lower Side View

Identification of all input/output terminals and mounting points on the projector.

Controls and Functions

Control Panel

Description of the buttons and indicator lights on the projector's main control panel.

Remote Control

Positioning Your Projector

Choosing a Location

Guidance on selecting the best placement for the projector considering room layout and power outlets.

Obtaining Preferred Projected Image Size

Determine Projector Position for Screen Size

Method to calculate projector placement based on screen dimensions and aspect ratio.

Determine Recommended Screen Size for Given Distance

Method to find optimal screen size based on projection distance and aspect ratio.

Projection Dimensions

Installation for 16:9 Ratio Screen

Technical data and diagrams for projection dimensions with 16:9 aspect ratio screens.

Installation for 4:3 Ratio Screen

Technical data and diagrams for projection dimensions with 4:3 aspect ratio screens.

Shifting Projection Lens Vertically

Connecting With Video Equipment

Preparations for Connection

Essential steps before connecting external video source devices to the projector.

Connecting HDMI Devices

Instructions for connecting devices via HDMI for high-definition audio/video.

Connecting Component-Video Devices

Guide for connecting devices using component video cables for better quality.

Connecting S-Video or Video Devices

Instructions for connecting via S-Video or composite video for standard definition.

Connecting a Computer

How to connect a PC or laptop using a VGA cable for display.

Projector Operation Basics

Preparations for Use

Steps required before turning on the projector and connected equipment.

Turning the Projector On

Procedure for powering up the projector and confirming its operational status.

Input and Picture Settings

Selecting an Input Source

How to choose and switch between different connected video signal sources.

Fine-Tuning Image Size and Clarity

Adjusting the zoom ring for size and focus ring for sharpness.

Projector Security and Menus

Using the Menus

Guide to accessing and navigating the projector's On-Screen Display (OSD) menu system.

Securing the Projector

Methods to prevent theft, such as using a Kensington security cable lock.

Password Management

Utilizing the Password Function

How to set up and use the projector's password security feature for unauthorized access.

Password Recall Procedure

Steps to follow if you forget the projector's password and need to recall it.

Changing the Password

Process for updating the existing password to a new one.

Disabling Password Function

How to turn off the password protection feature on the projector.

Adjusting the Projected Image

Adjusting Projection Angle

Using the projector's adjuster feet to change image height and projection angle.

Correcting Picture Distortion

Using keystone correction to fix trapezoidal image shapes caused by non-perpendicular projection.

Picture Mode Settings

Selecting a Preset Mode

Choosing predefined picture settings like Cinema, Dynamic, Standard, or 3D.

Fine-Tuning Selected Picture Mode

Customizing user-definable picture modes (User 1, User 2, User 3).

Setting User I/User 2/User 3 Mode

Recalling and customizing user-defined picture settings.

Resetting Picture Mode

Restoring selected picture modes to their factory default values.

Picture Quality Fine-Tuning

Adjusting Brightness

Controlling the overall lightness or darkness of the projected image.

Adjusting Contrast

Modifying the difference between the brightest and darkest parts of the image.

Adjusting Color

Adjusting the saturation level of colors within the projected picture.

Adjusting Tint

Modifying the red and green tones to adjust the overall color balance.

Adjusting Sharpness

Enhancing or softening image detail for clearer or softer picture appearance.

Selecting a Color Temperature

Adjusting the white balance of the image (Warm, Normal, Cool, Lamp Native).

Advanced Picture Quality Controls

Setting Black Level

Adjusting the video signal's black level reference (0 IRE or 7.5 IRE).

Controlling Image Clarity

Reducing image noise and improving overall picture clarity with noise reduction.

Setting Preferred Color Temperature

Fine-tuning specific color temperature settings like Red, Green, and Blue gains/offsets.

Selecting a Gamma Setting

Adjusting picture brightness response curve for different viewing environments.

Adjusting Brilliant Color

Enhancing color vibrancy and brightness using a special color-processing algorithm.

Color Management

Advanced control over individual colors (RGBCMY) for precise color reproduction.

Setting Film Mode

Improving picture quality specifically for film-sourced content.

Setting 3D Comb Filter

Enhancing image clarity for composite or S-Video signals by separating color and brightness.

Adjusting the Sound

Muting the Sound

Temporarily turning off the projector's audio output.

Adjusting Sound Level

Controlling the volume of the projector's built-in speakers.

Turning Off Power On/Off Ring Tone

Disabling the audio cues that play when the projector powers on or off.

Selecting the Aspect Ratio

About Aspect Ratio

Explanation of different aspect ratio modes and their applications.

Magnifying and Searching for Details

Operating in High Altitude Environment

Watching 3D Content

Connecting 3D Video Devices

How to connect compatible devices like Blu-ray players or game consoles for 3D viewing.

Using the 3D Menus

Adjusting projector settings, such as 3D mode and sync, for optimal 3D experience.

Personalizing Projector Menu Display

Locking Control Keys

Preventing accidental changes to projector settings by locking control buttons.

Turning the Projector Off

Procedure for powering down the projector and the associated cooling process.

On-Screen Display (OSD) Menus

System Setup: Basic Menu

Settings for language, splash screen, auto-off timer, and menu display preferences.

System Setup: Advanced Menu

Settings for lamp, HDMI, password, key lock, ISF calibration, and reset options.

Picture Menu Functions

Accessing and adjusting picture modes, brightness, contrast, color, tint, and sharpness.

Audio Setup Menu Functions

Accessing and adjusting sound settings like mute, volume, and ring tone.

Display Menu Functions

Accessing and adjusting aspect ratio, keystone, position, and digital zoom.

3D Menu Functions

Accessing and adjusting 3D mode, sync invert, and related viewing settings.

Information Menu

Displays current projector status, source, resolution, lamp hour, and firmware version.

Additional Information

Care of the Projector

General advice on cleaning the lens and projector case, and proper storage.

Transporting the Projector

Recommendations for safely shipping the projector using original or equivalent packing.

Lamp Information

Getting to Know Lamp Hour

How to access and view the total hours the projector lamp has been used.

Extending Lamp Life

Tips and settings like Economic/SmartEco modes to prolong the projector lamp's lifespan.

Timing of Replacing the Lamp

Replacing the Lamp

Step-by-step instructions for safely replacing the projector lamp assembly.

Resetting the Lamp Timer

How to reset the lamp usage timer to zero after replacing the lamp.

Indicators

Normal State Indicators

Explanation of the Power, Temp, and Lamp status lights during normal operation.

Abnormal State Indicators

Meaning of status lights indicating potential issues or errors with the projector.

Troubleshooting

Projector Does Not Turn On

Solutions for issues related to the projector failing to power on.

No Picture

Troubleshooting steps for when the screen remains blank or shows no image.

Image is Unstable

How to resolve problems with flickering, distorted, or unstable projected images.

Picture is Blurred

Steps to fix out-of-focus images by adjusting the projection lens.

Remote Control Does Not Work Correctly

Troubleshooting steps for when the remote control is unresponsive or malfunctioning.

3D Content Does Not Display Correctly

Solutions for common issues when 3D content is not displayed properly.

Specifications

Optical Specifications

Details on resolution, display system, lens characteristics, and lamp type.

Electrical Specifications

Information on power supply requirements and power consumption levels.

Mechanical Specifications

Details regarding the projector's weight and physical dimensions.

Output Terminals

Description of available audio and video output ports on the projector.

Control Specifications

Information on control interfaces like RS-232 serial and IR receiver.

Input Terminals

List of all supported video, audio, and PC input ports available on the projector.

Environmental Requirements

Operating conditions including temperature, humidity, and altitude limits.

Dimensions

Physical size measurements of the projector and its mounting compatibility.

Ceiling Mount Installation

Details and diagrams related to installing the projector using a ceiling mount.

Timing Chart

Supported Timing for PC Input

Table detailing compatible timing formats, resolutions, and frequencies for PC input.

Supported Timing for HDMI (HDCP) Input

Table detailing compatible timing formats for HDMI input signals.

Supported Timing for EDTV and HDTV (via Component Inputs)

Table detailing timing formats for analog HD and EDTV signals via component inputs.

Supported Timing for Video and S-Video Inputs

Table detailing timing formats for standard definition video and S-Video inputs.

Warranty and Copyright Information

Warranty

Details of the product warranty coverage, terms, and conditions.

Copyright

Information regarding the copyright ownership and usage restrictions of the publication.

Disclaimer

Legal statement concerning representations, warranties, and liability of the content.

Related product manuals