40
Using the projector
On-Screen Display (OSD) menus
On-Screen Display (OSD) structure
Please note that the on-screen display (OSD) menus vary according to the signal type selected.
Main menu Sub-menu Options
Picture
Preset Mode Cinema/Dynamic/Standard/User 1/User 2/User 3/3D/ISF Night/ISF Day
User Mode Management
Brightness 0–100
Contrast 0–100
Color 0–100
Tint 0–100
Sharpness 0–15
Color Temperature Normal/Cool/Lamp Native/Warm
Lamp Power Normal/Economic/SmartEco
Advanced...
Black Level 0 IRE/7.5 IRE
Clarity Control Noise Reduction
Color Temperature Fine
Tuning
Red Gain/Green Gain/Blue Gain/Red Offset/
Green Offset/Blue Offset
Gamma Selection 1.6/1.8/2.0/2.2/2.4/2.5/2.6/2.8/BenQ
Brilliant Color On/Off
Color Management Primary Color/Hue/Gain/Saturation
Reset Picture Settings
Audio Setup
Mute On/Off
Volume 0-10
Power On/Off Ring Tone On/Off
Display
Aspect Ratio Auto/Real/4:3/Wide/Anamorphic//Letter Box
Keystone
Position
Overscan Adjustment 0/1/2/3
PC & Component
YPbPr Tuning
H.Size
Phase
Auto
Digital Zoom
Film Mode On/Off
3D Comb Filter On/Off
3D
3D Mode
Auto/Off/Frame Sequential/Frame Packing/
Top-Bottom/Side-by-Side
3D Sync Invert Disable/Invert
To Next Page
Loading...
