BenQ W1600UST - User Manual

Other manuals for BenQ W1600UST

Questions and Answers

M
Megan DiazAug 11, 2025
How to fix BenQ W1600UST Projector that does not turn on?
- C
  Colleen ReynoldsAug 11, 2025
  If your BenQ Projector isn't turning on, consider these potential causes: * There might be no power from the power cord. Plug the power cord into the AC power jack on the projector and into the power outlet. If the outlet has a switch, ensure it's switched on. * You might be attempting to turn the projector on again during the cooling process. Wait until the cooling down process has completed.
T
tracy61Aug 18, 2025
What to do if BenQ Projector remote control does not work?
- L
  Linda MejiaAug 18, 2025
  If the remote control for your BenQ Projector isn't working, check the following: * The battery might be out of power. Replace the battery with new ones. * There might be an obstacle between the remote control and the projector. Remove the obstacle. * You might be too far away from the projector. Stand within 8 meters (26 feet) of the projector.
B
bfranklinAug 27, 2025
What to do if my BenQ W1600UST Projector has no picture?
- R
  Rose ReidAug 27, 2025
  If your BenQ Projector is displaying no picture, there are several potential causes: * The video source might not be turned on or connected correctly. Ensure the video source is on and the signal cable is properly connected. * The projector might not be correctly connected to the input signal device. Check the connection. * The input signal might not be correctly selected. Select the correct input signal using the SOURCE key on the projector or remote control. * The lens cover might still be closed. Open the lens cover.
E
Eric HopkinsSep 2, 2025
Why is my BenQ W1600UST Projector image blurred and how to fix it?
- M
  Michelle ButlerSep 2, 2025
  A blurred image on your BenQ Projector could be due to several reasons: * The projection lens might not be correctly focused. Adjust the focus of the lens using the focus ring. * The projector and the screen might not be aligned properly. Adjust the projection angle and direction as well as the height of the projector if necessary. * The lens cover might still be closed. Open the lens cover.

BenQ W1600UST Specifications

General

Brightness	3000 ANSI Lumens
Lamp Life (Normal)	4000 hours
Display Technology	DLP
Aspect Ratio	16:9
Input Lag	16 ms
Speakers	10 W
Resolution	1920x1080 (Full HD)
Contrast Ratio	10, 000:1
Lamp Life (Eco)	10000 hours
Connectivity	HDMI, VGA, USB, RS-232
Color Depth	1.07 billion colors
Inputs	HDMI, VGA, USB, RS-232