What to do if BenQ W1300 remote control does not work?
If the BenQ Projector's remote control isn't working, first, replace the battery with a new one. If that doesn't solve the issue, check for any obstructions between the remote and the projector and remove them. Finally, make sure you are within 7 meters (23 feet) of the projector.
How to fix BenQ W1300 Projector that does not turn on?
If your BenQ Projector doesn't turn on, first, ensure the power cord is securely plugged into both the AC inlet on the projector and the power outlet, and that the outlet switch is on. Also, if you've recently tried turning it on, wait until the cooling down process has completed before attempting to power it on again.
Why is there no picture on my BenQ Projector?
If there is no picture on your BenQ Projector, ensure that the video source is turned on and correctly connected. Also, verify that the projector is correctly connected to the input signal device by checking the connection. Finally, make sure the correct input signal is selected using the SOURCE key on the projector or remote control.
How to fix blurred image on BenQ W1300 Projector?
If the image on your BenQ Projector is blurred, adjust the focus of the lens using the focus ring. If the issue persists, adjust the projection angle, direction, and height of the unit to properly align the projector and the screen.
General| Number of colors | 1.073 billion colors |
|---|---|
| Native aspect ratio | 16:9 |
| Projection distance | - m |
| Vertical scan range | 23 - 120 Hz |
| Horizontal scan range | 15 - 102 kHz |
| Projection technology | DLP |
| Supported aspect ratios | - |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | 26 - 300 \ |
| Projector native resolution | 1080p (1920x1080) |
| Keystone correction, vertical | ±40 ° |
| Throw ratio | 1.39 - 2.09:1 |
| Focal length range | 20.7 - 31.05 mm |
| Aperture range (F-F) | 2.42 - 2.97 |
| Lamp power | 240 W |
| Light source type | Lamp |
| Service life of light source | 3500 h |
| Service life of light source (economic mode) | 5000 h |
| Full HD | Yes |
| Video color modes | Cinema, Dynamic |
| Supported 3D formats | Frame Sequential, Frame packing, Side by side, Top and bottom |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC, PAL, SECAM |
| Supported graphics resolutions | 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080), 640 x 480 (VGA) |
| RMS rated power | 10 W |
| Number of built-in speakers | 1 |
| USB connector type | USB Type-B |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 0 |
| Ethernet LAN | No |
| Noise level | 33 dB |
| Noise level (economic mode) | 30 dB |
| On Screen Display (OSD) languages | ARA, BUL, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, FIN, FRE, GRE, HUN, ITA, JPN, KOR, NOR, POL, POR, RUM, RUS, SWE, THA, TUR |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | Silver |
| Market positioning | Home cinema |
| Cables included | VGA |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 290 W |
Weight and Dimensions| Depth | 257 mm |
|---|---|
| Width | 330 mm |
| Height | 128 mm |
| Weight | 3400 g |
Essential safety measures for safe projector operation and hazard prevention.
Further safety measures covering lamp handling, component replacement, and environmental operation.
Precautions for projector placement, ventilation, and operation in various environmental conditions.
Safety guidelines for projector mounting, environmental conditions, and ceiling installation.
Explains the functions of buttons and controls located directly on the projector unit.
Details IR transmitter and buttons for power, source selection, and menu navigation on the remote.
Explains remote buttons for picture quality, sound, and display settings.
Illustrates and describes connecting the projector via HDMI cable to various devices.
Illustrates how to connect the projector using Component Video cables.
Illustrates how to connect the projector using standard Video cables.
Explains connecting the projector to a computer using VGA or USB cables.
Step-by-step guide for powering on the projector and initial setup procedures.
How to adjust projector angle and use auto-adjustment for PC signal picture quality.
Instructions for adjusting image size/sharpness and correcting keystone distortion.
Overview of OSD menus and how to adjust Picture menu settings.
Steps for recalling or changing the projector's password.
How to switch between connected video sources and rename input labels.
Using ECO BLANK, FREEZE, and the proper procedure for shutting down the projector.
Information on when to replace the projector lamp based on indicators and warnings.
Detailed, step-by-step instructions for safely replacing the projector lamp.
Causes and remedies for common problems like no power, no picture, remote issues, and password errors.
To Next Page
