Operation40
Setting a preferred color temperature
To set a preferred color temperature:
1. Highlight Color Temperature Fine Tuning in the Picture > Advanced... menu
and press MODE/ENTER. The Color Temperature Fine Tuning page displays.
2. Press / to highlight the item you want to change and adjust the values by
pressing / .
• Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red, Green,
and Blue.
• Red Offset/Green Offset/Blue Offset: Adjusts the brightness levels of Red,
Green, and Blue.
3. To save and leave the settings, press MENU/EXIT.
Selecting a Gamma setting
Highlight Gamma Selection in the Picture > Advanced... menu and select a preferred
setting by pressing / on the projector or remote control.
Gamma refers to the relationship between input source and picture brightness.
• Gamma 1.6/1.8/2.0/BenQ
Select these values according to your preference.
• Gamma 2.2
Increases the average brightness of the picture. Best for a lit environment, meeting
room or family room.
• Gamma 2.4/2.5
Best for viewing movies in a darkened environment.
• Gamma 2.6/2.8
Best for viewing movies which are mostly composed of dark scenes.
Brilliant Color
Highlight Brilliant Color in the Picture > Advanced... menu and select by pressing /
on the projector or remote control.
This feature utilizes a new color-processing algorithm and system level enhancements to
enable higher brightness while providing truer, more vibrant colors in picture. It enables a
greater than 50% brightness increase in mid-tone images, which are common in video and
natural scenes, so the projector reproduces images in realistic and true colors. If you
prefer images with that quality, select On. If you don’t need it, select Off.
1.6
1.8 2.0 2.2 2.4 2.5 2.6 2.8
High Brightness
Low Contrast
Low Brightness
High Contrast
BenQ W1300.book Page 40 Thursday, August 29, 2013 2:07 PM
To Next Page
Loading...
