BenQ W1300 - Menu Operation; OSD Menu Structure and Picture Options

Operation48
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type
selected.
Main menu Sub-menu Options
1.
Picture
Preset Mode
ISF Disabled: Dynamic/Standard/
Cinema/User 1/User 2
ISF Enabled: Dynamic/Standard/
Cinema/User 1/User 2/ISF Night/
ISF Day
3D Enabled: 3D/User3
User Mode
Management
Reference Mode
ISF Disabled: Dynamic/Standard/
C i n e m a / U s e r 1 / U s e r 2
ISF Enabled: Dynamic/Standard/
Cinema/User 1/User 2/ISF Night /
ISF Day
3D Enabled: 3D/User3
Rename User
Mode
Keyboard popup
Brightness
Contrast
Color
Tint
Sharpness
Color
Te m p e r a t u r e
Normal/Cool/Lamp Native/Warm
Lamp Power Normal Normal/Economic/SmartEco
Advanced…
Black Level
Clarity Control Noise Reduction:0-31
Color
Temperature Fine
Tuning
Red Gain/Green Gain/Blue Gain/
Red Offset/Green Offset/Blue
Offset
Gamma Selection
1.6/1.8/2.0/2.2/2.4/2.5/2.6/2.8/
BenQ
Brilliant Color On/Off
Color
Management
Primary Color
(Red/Green/Blue/Cyan/Magenta/
Yellow)/Hue/Gain/Saturation
Reset Picture
Settings
Reset/Cancel
2.
Audio Setup
Mute
Volume
Power On/Off
Ring Tone
BenQ W1300.book Page 48 Thursday, August 29, 2013 2:07 PM