BenQ W1350 User Manual (English)

Questions and Answers:

M
Michael DuncanAug 8, 2025
Why my BenQ W1350 Projector does not turn on?
- A
  Anne SmithAug 8, 2025
  If your BenQ Projector isn't turning on, there could be several reasons. First, ensure the power cord is securely plugged into both the projector's AC inlet and a functioning power outlet, and that the outlet switch is on. Also, if the projector is cooling down, wait for the process to complete before attempting to turn it on again. Finally, check that the lamp cover is correctly and securely attached.
F
Felicia HintonAug 13, 2025
What to do if BenQ W1350 Projector remote control does not work?
- L
  leonardangelaAug 13, 2025
  If your BenQ Projector's remote control isn't working, the battery might be out of power, so try replacing it with a new one. Also, make sure there isn't anything blocking the path between the remote and the projector. Finally, ensure you're within 7 meters (23 feet) of the projector.
M
markespinozaAug 18, 2025
How to fix no picture on BenQ W1350?
- S
  scottalexisAug 18, 2025
  If you're not getting a picture on your BenQ Projector, first ensure that the video source is turned on and the signal cable is properly connected. Then, verify that the projector is correctly connected to the input signal device. Finally, select the correct input signal using the SOURCE key on the projector or remote control.
R
Robert HardingAug 23, 2025
Why is the picture blurred on my BenQ Projector?
- J
  joshuajeffersonAug 23, 2025
  If the picture on your BenQ Projector is blurred, it could be due to a few reasons. Try adjusting the focus of the lens using the focus ring. Also, ensure that the projector and the screen are aligned properly by adjusting the projection angle, direction, and height if needed. Don't forget to remove the lens cover if it's still on.
A
Amanda MartinAug 28, 2025
How to stabilize unstable image on BenQ W1350 Projector?
- R
  Robert BallardAug 28, 2025
  If the image on your BenQ Projector is unstable, it's likely due to loose connection cables. Ensure that all connection cables are securely connected to both the projector and the signal source at the appropriate terminals.
R
Rachel TorresSep 3, 2025
What to do if 3D content does not display correctly on BenQ W1350 Projector?
- J
  Jessica EscobarSep 3, 2025
  If 3D content isn't displaying correctly on your BenQ Projector, first try recharging the 3D glasses. Then, ensure that the settings in the 3D menu are correctly configured. Verify that you are using a 3D Blu-ray Disc. Finally, make sure the correct input source is selected using the SOURCE key on the projector or remote control.

BenQ W1350 Specifications

General

Display Technology	DLP
Native Resolution	1920 x 1080
Contrast Ratio	10000:1
Aspect Ratio	16:9
Lamp Life (Normal)	3500 hours
Lamp Life (Eco)	6000 hours
Lens Shift	Vertical: ±10%
Connectivity	HDMI, VGA, USB
Zoom Ratio	1.5x