BenQ W1300 - Remote Control - Picture and Sound Adjustments

Projector features 13
13. CONTRAST
Displays the CONTRAST setting bar. See
"Adjusting Contrast" on page 38 for
details.
14. COLOR
Displays the COLOR setting bar. See
"Adjusting Color" on page 38 for details.
15. COLOR TEMP
Displays the Color Temperature setting
bar. See "Selecting a Color Temperature"
on page 39 for details.
16. FINE TUNE
Displays the Color Temperature Fine
Tune setting bar. See "Setting a preferred
color temperature" on page 40 for details.
17. MUTE
Mutes the built-in speaker.
18. LIGHT
Turns on or off the remote control
backlight for about 10 seconds. Pressing
any other key while the backlight is on
keeps the backlight on for a further 10
seconds.
19. PC
Displays the PC source selection. See
"Switching input signal" on page 35 for
details.
20. COMP
Displays the COMPONENT source
selection. See "Switching input signal" on
page 35 for details.
21. VIDEO
Displays the VIDEO source selection. See
"Switching input signal" on page 35 for
details.
22. AUTO
Automatically determines the best picture
timings for the displayed image.
23. MODE/ ENTER
MODE: Choose a suitable preset mode
for usage environment.
ENTER: Enter key for OSD menu.
24. Right cursor/Increase volume level
(/ )
: Navigates and changes settings in
the OSD. See "Using the menus" on page
31 for details.
: Increase Volume.
25. SOURCE
Displays the source selection bar.
26. PIP
Enables the PIP function. Use the / /
/ keys to adjust the position of the
PIP window
27. SRS
Turns on/off the SRS (Sound Retrieval
System) surround sound effects.
28. BRIGHT
Displays the Brightness setting bar. See
"Adjusting Brightness" on page 38 for
details.
29. SHARP
Displays the Sharpness setting bar. See
"Adjusting Sharpness" on page 38 for
details.
30. TINT
Displays the Tint setting bar. See
"Adjusting Tint" on page 38 for details.
31. INVERT
Set 3D Sync Invert to Disable or Invert.
32. 3D
Displays the 3D setting bar.
33. TEST
Displays the test pattern.
34. FREEZE
Freeze/unfreezes the on-screen picture.
See "Freezing the image" on page 47 for
details.
BenQ W1300.book Page 13 Thursday, August 29, 2013 2:07 PM