Need help?Do you have a question about the BenQ W1000 and is the answer not in the manual?
General| Vertical scan range | 50 - 85 Hz |
|---|---|
| Horizontal scan range | 31 - 90 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | 3000:1 |
| Screen size compatibility | 24 - 300 \ |
| Keystone correction, vertical | ±20 ° |
| Aspect ratio | 16:9 |
| RS-232 ports | 1 |
| Compatibility | VGA - WUXGA |
| Dimensions (WxDxH) | 325 x 95 x 254 mm |
| Power requirements | 100 - 240 VAC, 50/60 Hz |
| F-number (relative aperture) | F = 2.5 - 2.76 |
| Focal length range | 23.5 - 28.2 mm |
| Lamp power | 180 W |
| Light source type | Lamp |
| Service life of light source | 3000 h |
| Service life of light source (economic mode) | 4000 h |
| Full HD | Yes |
| RMS rated power | 3 W |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Cables included | VGA |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 230 W |
| Display number of colors | 1.073 billion colors |
| Market positioning | Home cinema |
Weight and Dimensions| Weight | 3400 g |
|---|
To Next Page
