BenQ W1300 - System Setup: Advanced and Information Menus

Operation50
Note that the menu items are available when the projector detects at least one valid signal.
If there is no equipment connected to the projector or no signal detected, limited menu
items are accessible.
5.
System
Setup:
Advanced
Lamp Settings
Reset Lamp
Timer
Equivalent Lamp
Hour
HDMI Settings HDMI Format
Auto/PC Signal/Video Signal
PC Signal 0 ~255 level
Video Signal 16~235 level
Baud Rate
2400/4800/9600/14400/19200/
38400/57600/115200
Test Pattern On/Off
Closed Caption
Closed Caption
Enable
On/Off
Caption Version CC1/CC2/CC3/CC4
Quick Cooling On/Off
High Altitude
Mode
On/Off
Password
Change Password
Power On Lock On/Off
Key Lock On/Off
Reset All
Settings
ISF Input password
6.
Information
Current System
Status
•Source
•Preset Mode
•Resolution
• Color System
• Equivalent Lamp Hour
•3D Format
• Firmware Version
Main menu Sub-menu Options
BenQ W1300.book Page 50 Thursday, August 29, 2013 2:07 PM