BenQ W1600UST - Positioning Your Projector; Using the Quick Install

Positioning your projector 15
Positioning your projector
Using the quick install
The projector provides a hot key to set Test Pattern, Projector
Installation, and Keystone quickly.
Press QUICK INSTALL on the remote control and press /
to select from the below items:
• Projector Installation. See "Positioning your projector" on
page 15 for details.
• Test Pattern. See "Using the test pattern" on page 36 for details.
• Keystone. See "Correcting keystone" on page 23 for details.
1. Choosing a location
Your projector is designed to be installed in one of the following possible installation
locations:
2. Using the test pattern
Quick Install
Test Pattern
Projector Installation
Keystone
Exit
Front Table
Rear Table