BenQ W1070 - Specifications; Optical Specifications; Electrical Specifications; Mechanical Specifications

54
Using the projector
Specifications
All specifications are subject to change without notice.
Optical
Resolution
1920 (H) x 1080 (V)
Display system
Single-chip DLP
TM
system
Lens F/Number
(W1070)
F = 2.59 to 2.87, f = 16.88 to 21.88 mm
(W1080ST)
F = 2.6 to 2.78, f = 10.2 to 12.24 mm
Lamp
240 W lamp
Electrical
Power supply
AC100–240V, 3.4 A, 50-60 Hz (Automatic)
Power consumption
375 W (Max); < 0.5 W (Standby)
Mechanical
Weight
(W1070)
2.65 Kg (5.84 lbs)
(W1080ST)
2.85 Kg (6.28 lbs)
Output terminals
Speaker
(Stereo) 10 watt x 1
Audio signal output
PC audio jack x 1
Control
RS-232 serial control
9 pin x 1
IR receiver x 2
Mini B type USB x 1
12VDC (Max. 0.5 A) x 1
Input terminals
Computer input
RGB input
D-Sub 15-pin (female) x 1
Video signal input
S-VIDEO
Mini DIN 4-pin port x 1
VIDEO
RCA jack x 1
SD/HDTV signal input
Analog - Component RCA jack x 3
(through RGB input)
Digital - HDMI x 2
Audio signal input
Audio in
RCA audio jack (L/R) x 2
PC audio jack x 1
Environmental Requirements
Operating temperature
0°C–40°C at sea level
Operating relative humidity
10%–90% (without condensation)
Operating altitude
0–1499 m at 0°C–35°C
1500–3000 m at 0°C–30°C (with
High Altitude Mode on)