26
Using the projector
Using the menus
The projector is equipped with multilingual On-Screen Display (OSD) menus for making various
adjustments and settings.
Below is the overview of the OSD menu.
To use the OSD menus, please set the OSD menu to your familiar language.
Securing the projector
Using a security cable lock
The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a lock, such as the
Kensington lock, to secure the projector. You can locate a Kensington lock slot on the projector. See item
24 on page 10 for details.
A Kensington security cable lock is usually a combination of key(s) and the lock. Refer to the lock's
documentation for finding out how to use it.
1. Press MENU/EXIT on the projector or remote
control to turn the OSD menu on.
2. Use / to highlight the System Setup : Basic
menu.
3. Press to highlight Language and press
MODE/ENTER.
4. Press / / / to select a preferred
language.
5. Press MENU/EXIT twice* on the
projector or remote control to leave and
save the settings.
*The first press leads you back to the main
menu and the second press closes the OSD
menu.
To Next Page
Loading...
