BenQ W700 - Operation Settings Command Reference

124
Operation Setting
Type Operation ASCII Note
Write
Projector
Position-Front Table
<CR>*pp=FT#<CR>
power on
Write
Projector
Position-Rear Table
<CR>*pp=RE#<CR>
power on
Write
Projector
Position-Rear Ceiling
<CR>*pp=RC#<CR>
power on
Write
Projector
Position-Front
Ceiling
<CR>*pp=FC#<CR>
power on
Read
Projector Position
Status
<CR>*pp=?#<CR> power on
Write Direct Power On-on <CR>*directpower=on#<CR> power on
Write Direct Power On-off <CR>*directpower=off#<CR> power on
Read
Direct Power
On-Status
<CR>*directpower=?#<CR> power on
Write Signal Power On-on <CR>*autopower=on#<CR> power on
Write Signal Power On-off <CR>*autopower=off#<CR> power on
Write
Signal Power
On-Status
<CR>*autopower=?#<CR>
power on
Write
Standby
Settings-Network on
<CR>*standbynet=on#<CR>
power on
Write
Standby
Settings-Network off
<CR>*standbynet=off#<CR>
power on
Read
Standby
Settings-Network
Status
<CR>*standbynet=?#<CR>
power on
Write
Standby
Settings-Microphone
on
<CR>*standbymic=on#<CR>
power on
Write
Standby
Settings-Microphone
off
<CR>*standbymic=off#<CR>
power on
Write
Standby
Settings-Microphone
Status
<CR>*standbymic=?#<CR>
power on
Write
Standby
Settings-Monitor Out
on
<CR>*standbymnt=on#<CR>
power on
Write
Standby
Settings-Monitor Out
off
<CR>*standbymnt=off#<CR>
power on
Write
Standby
Settings-Monitor Out
Status
<CR>*standbymnt=?#<CR>
power on