41 Menu operation
HDMI Settings
• HDMI Format
Selects a suitable RGB color range to correct the color accuracy.
• Auto: Automatically selects a suitable color range for the incoming
HDMI signal.
• Limited: Utilizes the Limited range RGB 16-235.
• Full: Utilizes the Full range RGB 0-255.
• HDMI Equalizer
Sets a suitable value to maintain the HDMI picture quality in long distance
data transmission.
• HDMI EDID
Switches between Enhanced for HDMI 2.0/Type C EDID and Standard for
HDMI 1.4 EDID. Selecting Standard which supports up to 1080p 60Hz may
solve abnormal display issues with some old players.
• Power On Link/Power Off Link
When you connect an HDMI CEC-compatible device to your projector with
an HDMI cable, you can set the behavior of powering on/off between the
device and the projector.
4K Upscaling
(AK700ST only)
Enables or disables "XPR always ON" which upscales all input timings to
4K resolution.
Screen Fill
Select the screen aspect ratio. The native resolution changes in
accordance with user’s selection.
When Screen Fill is set to 16:10, 4:3, or 1:1, Aspect Ratio is set to Auto and is not available
for adjustment.
Reset Display
Returns all the settings on the Display main menu to the factory default
values.
Power On Link >
From Device
When the connected device is turned on, the
projector will be activated, too.
Power Off Link >
From Projector
When the projector is turned off, the connected
device will be shut down, too.
To Next Page
