31
BenQ C260 Mobile Phone
Press or on the scroll key to the content field,
press “Edit” soft key to enter the desired content of the
message. When finished, press “OK” soft key.
Now you can send the message. Follow the steps in the
“To send a message” section below.
Option 1I: In the Messages Menu, select “Quick Msg”.
10 quick messages will be available for you to select.
Select the one you desired and press “Send” key.
Now you can send the message. Follow the steps in the
“To send a message” section below.
To send a message:
• After you have completed writing a message, then press or
on the scroll key to the phone number field, press “Edit”
soft key to enter the receiver’s phone number. The “Send to”
screen will appear. Now you can select one of the following
method to enter the receiver’s phone number:
Phone #: Enter the receiver’s phone number and press “OK” soft
key.
Phonebook: Pick up the receiver’s phone number from Phone Book.
When finished, you can select “Send” soft key to send the message
right away. Also, you can press or on the scroll key to the
option field and press “Edit” soft key to access the options for this
message. These options are shown as follows:
1. Save: Save this message to draft.
2. Callback #: Specify the callback number of this message.
3. Delivery Acknowledgement:
Set up the delivery acknowledgement. If you set it to “Yes”,
you will receive a notification when a message is successfully
sent or failed.
4. Priority: Specify the priority of the message. You can choose from
“Normal” or “Urgent”.
5. Expire Period: You can set up the expiration period of message
here. Expiration period is the time the message
center handles the messages you sent and deliver
them to the receiver you specified. If due to any
reason, the message can not be delivered
successfully within the expiration period, the
To Next Page
Loading...