What to do if BenQ CinePrime W2700 has no picture?
If your BenQ Projector displays no picture, ensure the video source is on and properly connected. Check the connection between the projector and the input signal device. Select the correct input signal using the SOURCE key. Also, make sure the lens cover is open.
General| Brightness | 2000 ANSI Lumens |
|---|---|
| Contrast Ratio | 30, 000:1 |
| Light Source | Lamp |
| HDR | HDR10, HLG |
| Zoom Ratio | 1.3x |
| Speakers | 5W x 1 |
| Display Technology | DLP |
| Throw Ratio | 1.13 - 1.47 |
| Dimensions | 380 x 127 x 263 mm |
| Weight | 4.2 kg |
| Resolution | 3840 x 2160 |
| Lens Shift | Vertical: +10% |
| Inputs | USB Type A |
| Outputs | Audio out (3.5mm Mini Jack) |
| Lamp Life | 4, 000 / 10, 000 / 15, 000 hours (Normal / Economic / SmartEco) |
| Noise Level | 30/28 dBA (Normal/Eco) |
To Next Page
