BenQ DC S30 - Loading an SD Memory Card

BenQ DC 5530 User’s Manual
English
Preparing Your DC S30 for Use
7
2.4 Loading an SD Memory Card
All images and video clips taken by the camera can be stored in an SD (Secure Digital)
Memory Card as well as the camera’s internal memory. Even if the camera’s power is OFF, the
images saved in the SD Memory Card are not erased.
1. Make sure the camera is off.
2. Slide the battery/SD Memory Card cover in the
direction of the arrow on the cover.
3. Insert an SD Memory Card:
• The front side of the memory card (printed
arrow) should face towards the front side of
the camera.
• If the card cannot be inserted, check the ori-
entation.
4. Close the battery/SD Memory Card cover.
To remove the SD Memory Card, make sure the camera is off. Open the battery/SD Memory
Card card cover. Press lightly on the edge of the memory card and it will eject.
Notes
•
To prevent valuable data from being
accidentally erased from an SD Memory
Card, slide the write-protect tab (on the
side of the SD Memory Card) to
"LOCK".
• To save, edit, or erase data on an SD
Memory Card, you must unlock the card.
• Format your SD Memory Card before use. Refer to 3.5.1“Memory” on page 28.
L
C
D
/
S
E
T
M
E
N
U
-C
Q
-
V
I
E
W
/
D
E
L
M
A
LOCK
Write-protect tab
Press the tab in the
direction of the arrow
on the card to write
protect the SD Memory
Card.