BenQ DC S30 - Set-Up Mode; Memory; Number Reset

BenQ DC 5530 User’s Manual
English
Using the DC S30
28
3.5 SET-UP MODE
This feature allows you to set up the default settings for using your camera in addition to
image-related settings. Select your personal preferences for the camera with this mode.
3.5.1 Memory
This item enables you to format the SD Memory Card
or built-in memory in your camera. All images and
movies, including protected images are erased. An SD
Memory Card can’t be formatted if it is write-protected.
This item also lets you copy images and movies on the
internal memory to the SD Memory Card.
1. In Manual, Auto, or Movie mode, press MENU/C.
2. Press to navigate to the top of the menu, and
then press to select Setup mode .
3. Select Memory . The following options are
available:
Copy: copies the internal memory to the external flash card.
Format: formats the memory.
4. Press LCD/SET when you have made your selection. You are prompted to confirm the
action.
5. Select Yes and press LCD/SET to complete the action. Otherwise, select No.
3.5.2 Number Reset
Enables you to reset file numbering in memory to 0001.
1. In Manual, Auto, or Movie mode, press MENU/C.
2. Press to navigate to the top of the menu, and
then press to select Setup mode .
3. Select NumReset .
4. Press LCD/SET. You are prompted to confirm the
action.
5. Select Yes and press LCD/SET to complete the
action. Otherwise, select No.
SD
Memory
Memory
SD
SD
SD
YMD
YMD
09 / 07 / 2018
Set
SD
SD
SD
12
3
NumReset
NumReset
SD
SD
YMD
YMD
09 / 07 / 2018
Set
12
3