BenQ DC S30 - Reset; SW Version

BenQ DC 5530 User’s Manual
English
Using the DC S30
32
3.5.10 Reset
Enables you to reset the camera to factory defaults.
1. In Manual, Auto, or Movie mode, press MENU/C.
2. Press to navigate to the top of the menu, and then
press to select Setup mode .
3. Select Reset .
4. Press LCD/SET. You are prompted to confirm the
action. Select Yes.
5. Press LCD/SET. The camera’s settings are returned to the factory defaults.
6. Press MENU/C exit the Setup menu.
3.5.11 SW Version
Displays the camera’s SW version.
1. In Manual, Auto, or Movie mode, press MENU/C.
2. Press to navigate to the top of the menu, and
then press to select Setup mode .
3. Select Version. The version screen displays the
camera’s software version.
Reset
Reset
Reset
On
NT
SC
Tv
z
z
On
English
Reset
Version
Version
V1023