13 How to assemble your monitor hardware
4. Connect USB Devices.
I. Connect the USB cable between the PC and the monitor
(via the upstream USB port at the back). This upstream
USB port transmits data between the PC and the USB
devices connected to the monitor.
II. Connect USB devices via other USB ports
(downstream) on the monitor. These downstream USB
ports transmit data between connected USB devices and
the upstream port.
See picture on the right.
5. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
on the rear of the monitor. Do not connect the other
end to a power outlet just yet.
6. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power key.
Turn on the computer too, and follow the instructions in
Getting the most from your BenQ monitor on page
16 to install the monitor software.
To extend the service life of the product, we recommend
that you use your computer's power management
function.
To Next Page
Loading...
Need help?
General
