107 Dodatak: Upotreba (Launcher) za verziju softvera stariju od v01.00.19.00
Dodatak: Upotreba (Launcher) za verziju
softvera stariju od v01.00.19.00
BenQ Launcher
BenQ Launcher is the projector’s operating system that allows you to wirelessly cast your
device’s screen, play files, run apps, as well as adjust projector settings.
The BenQ Launcher home screen
Upon initial start up or when BenQ Launcher is selected in the input source menu, the
projector will display BenQ Launcher. If the projector is projecting from an input source (e.g.
HDMI or PC), you can return to BenQ Launcher mode by pressing the source button or the
LAUNCHER button on the remote control and then selecting BenQ Launcher in the input
source menu.
The BenQ Launcher home screen features five main sections:
• Status Bar icons - Icons that display the time, Bluetooth, and wireless status.
• Wireless Projection buttons - Provides instructions on how to project wirelessly via
iOS/Android devices or a laptop/PC.
• Source menu - Allows you to select open media files from storage devices connected to the
USB-1 or USB-2 ports, or video input source connected to the HDMI or PC ports for
projection.
Use the remote control or connect a USB mouse to the projector’s USB-1 or USB-2 ports to navigate BenQ
Launcher and operate its functions.
When the Auto Source Search function is enabled in the Advanced > Settings menu of the projector’s
OSD menu, the projector will display the BenQ Launcher home screen by default every time it is powered
on. If the Auto Source Search function is disabled, the projector will detect if a signal is available from the
input source that was last used and switch to that input source if it is available, if a signal is not available or
the projector was set to BenQ Launcher during the previous session, the projector will enter the BenQ
Launcher home screen. See Postavke on page 90.
Actual screen may vary based on your BenQ Launcher firmware version.
To Next Page
Loading...
