120 Dodatak: Upotreba (Launcher) za verziju softvera stariju od v01.00.19.00
External Storage Connections
Connecting a flash drive
Connect a USB-A flash drive to the USB-1 or USB-2 port at the rear of the projector to play files
stored on the flash drive.
To play files stored on a flash drive:
1. Connect the USB-A flash drive to the USB-1 or USB-2 port at the rear of the projector.
2. A pop-up notification from the File Manager app will appear indicating that a storage
device is detected. Select All Files and press OK to open the device.
• If you want to play media from a flash drive while the projector is set to the HDMI or PC input source, you
must first return to the BenQ Launcher interface by pressing the source button
or the LAUNCHER
button on the remote control and then selecting BenQ Launcher.
• A red dot will appear above the USB icon in the Source menu anytime a USB-A flash drive is connected
to the projector.
• If you do not want to open the media file immediately after connecting the storage device, press the back
button
to remain on the current screen.
• If you are trying to open a media file from a storage device that was already previously connected, select
USB in the Source menu, press OK, and select All Files.
To Next Page
Loading...
