BenQ GW2760HL User Manual

2
Copyright
Copyright © 2017 by BenQ Corporation. All rights reserved. No part of this publication may
be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any
language or computer language, in any form or by any means, electronic, mechanical, magnetic,
optical, chemical, manual or otherwise, without the prior written permission of BenQ
Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability or
fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this
publication and to make changes from time to time in the contents hereof without obligation of
BenQ Corporation to notify any person of such revision or changes.
The performance of flicker-free may be affected by external factors such as poor cable quality,
unstable power supply, signal interference, or poor grounding, and not limited to the above
mentioned external factors. (Applicable for flicker-free models only.)
Power Safety
• The AC plug isolates this equipment from the AC supply.
• The power supply cord serves as a power disconnect device for pluggable equipment. The
socket outlet should be installed near the equipment and be easily accessible.
• This product should be operated from the type of power indicated on the marked label. If you
are not sure of the type of power available, consult your dealer or local power company.
• An approved power cord greater or equal to H03VV-F or H05VV-F, 2G or 3G, 0.75mm
2
must
be used.
Care And Cleaning
• Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD
monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass
cleaners.
• Slots and openings on the back or top of the cabinet are for ventilation. They must not be
blocked or covered. Your monitor should never be placed near or over a radiator or heat
source, or in a built-in installation unless proper ventilation is provided.
• Never push objects or spill liquid of any kind into this product.
Please follow these safety instructions for best performance, and long life for your monitor.

BenQ GW2760HL Specifications

General

3D	No
Color gamut	72 %
Pixel pitch	0.311 x 0.311 mm
Screen shape	Flat
Display diagonal	27 \
Display technology	-
Native aspect ratio	16:9
Contrast ratio (dynamic)	20000000:1
Contrast ratio (typical)	3000:1
Display number of colors	16.78 million colors
Digital vertical frequency	50 - 76 Hz
Digital horizontal frequency	30 - 83 kHz
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
Dynamic contrast ratio marketing name	High Contrast
Product color	Black
No flickering	Yes
Active display area (W x H)	597.3 x 336.15 mm
Tilt angle range	-5 - 20 °
Number of OSD languages	18
Panel mounting interface	100 x 100 mm
On Screen Display (OSD) languages	ARA, CHI (SIMPL), CHI (TR), CZE, DEU, DUT, ENG, ESP, FRE, HUN, ITA, JPN, KOR, POL, POR, RUM, RUS, SWE
RMS rated power	2 W
Number of speakers	2
Power consumption (standby)	- W
Power consumption (typical)	48 W
Power consumption (PowerSave)	0.3 W

Weight and Dimensions

Depth (with stand)	191.18 mm
Height (with stand)	472.08 mm
Weight (with stand)	5900 g
Depth (without stand)	50.72 mm
Width (without stand)	622.6 mm
Height (without stand)	367.05 mm
Weight (without stand)	4500 g