BenQ GW2760HS - 3 Product Overview; Specification

- 5 -
3 Product Overview
3.1. Specification
Introduction
This specification describes GW2760HS, which is a 24” Green-Product with VGA+DVI+HDMI
interface and earphone output color TFT LCD monitor. The monitor supports maximum resolution
up to 1920x1080 with analog/digital inputs.
The features summary is shown as below,
* All spec. of monitor need to warm up at least 1hr.
* To test the “Contrast Ratio” and “Luminance” functions, the color status must be “User preset”
mode.
* 1. “Contrast Ratio”: Set “brightness” at 100, and “contrast” at 50.
* 2. “Luminance”: Set “brightness” at 100, and “contrast” at 100.
Feature items
Specifications
Remark
Panel supplier & module name
AUO M270HVN02.0 PS
VA, LED backlight
Screen diagonal
27”
597.6(H)x336.15(V)
Display Format
1920 (H) x 1080 (V)
Panel Display information
Pixel Pitch
0.31125 mm x 0.31125 mm
per one triad
Color Gamut
69%
Viewing Angle (@ Contrast Ratio >= 10)
R/L: 178 degrees (typ)
U/D: 178 degrees (typ)
Analog interface with Scaling supported
Yes
With 15-pin D-sub
connector
DVI interface with Scaling supported
Yes
HDMI interface with Scaling supported
Yes
Video interface with Scaling supported
No
Max resolution mode supported
1920x1080@60Hz
Number of Display Colors supported
16.7 millions
RGB 8-bit
Contrast Ratio
3000:1 (typ.)
Test Condition:
Contrast=50,
Brightness=100,
Color=User mode
Luminance
300 cd/m
2
(typ.)
Test Condition:
Contrast=100,
Brightness=100,
Color=User mode
Color Temperature
(1) Bluish mode:
(x,y)=
(0.283, 0.297)+/-(0.02, 0.02)
(2) Reddish mode:
(x,y)=
(0.326, 0.342)+/-(0.02, 0.02)