32 Using BenQ Joybee 120 MP3 Player
Function menu
All functions on Joybee 120 are accessible from the function
menu. Therefore, all you need to do is to remember how to
operate the function menu as shown in the bottom instruc-
tions in order to use these functions and change their settings.
Launching to the function menu
† When you turn on Joybee 120 for the first time, it will auto-
matically launch to the MP3/WMA mode.
Press to launch to the function menu.
† If you have turned off Joybee 120 in MP3/WMA, MIC Voice
Playback or FM Voice Playback mode, you may launch to the
function menu by pressing and to
launch to the function menu.
† If you have turned off Joybee 120 in FM Radio mode, follow
the bottom instructions to launch to the function menu.
1. Press .
2. Press or to scroll to ‘Mode’, and press .
3. After scrolling to ‘MP3/WMA’, ‘Voice Playback’ or ‘FM File
Playback’ mode, press .
4. Press .
To Next Page
Loading...