48 Using BenQ Joybee 120 MP3 Player
Turn backlight ON/OFF
After turning on Joybee 120, press and hold for about 2
seconds to turn on backlight. Press and hold for about 2
seconds again to turn off backlight.
Do not turn on backlight while recording to avoid noise in
recording.
System setup
Adjusting volume
1. Turn on Joybee 120 (skip this step when Joybee 120 has been
turned on).
2. Launch to the function menu as in "Launching to the func-
tion menu" p.32.
3. Press or to scroll to “SETTING” and press .
4. Press to launch to the Volume screen. Press to
reduce and to increase volume.
5. Press to confirm adjustment.
Press for several times to return to the func-
tion menu.
Selecting an EQ mode
1. Turn on Joybee 120 (skip this step when Joybee 120 has been
turned on).
2. Launch to the function menu as in "Launching to the func-
tion menu" p.32.
3. Press or to scroll to “System Setup” and press .
4. Press or to scroll to “EQ” and press .
To Next Page
Loading...