BenQ LW720 - Page 38

38 Menu operation
Network
Settings
HDMI Format
Selects a suitable color format to optimize display quality.
• Auto: Automatically selects a suitable color space and gray level for the incoming
HDMI signal.
• RGB Limited: Utilizes the Limited range RGB 16-235.
• RGB Full: Utilizes the Full range RGB 0-255.
• YUV Limited: Utilizes the Limited range YUV 16-235.
• YUV Full: Utilizes the Full range YUV 0-255.
Digital Zoom
Magnifies or reduces the projected image size. After the Digital Zoom page
displays, press ZOOM+/ZOOM- to reduce or magnify the image to a desired size.
Press the directional arrows ( , , , ) on the projector or remote control to
navigate the picture.
The picture can only be navigated after it is magnified. You can further magnify the picture while
searching for details.
Reset Display
Returns all of the adjustments you’ve made for the Display menu to the factory
preset values.
Wired LAN See Controlling the projector via LAN on page 27.
AMX Device
Discovery
When AMX Device Discovery is On, the projector can be detected by AMX
controller.
MAC Address
(Wired)
Displays the Mac Address for this projector.
Projector
Installation
See Choosing a location on page 12.
Remote
Receiver
Allows you to enable all the remote receivers or one specific remote receiver on
the projector.
Auto Source
Search
Allows the projector to automatically search for a signal.
Auto Sync
• On: Allows the projector to automatically determines the best picture timings for
the displayed image when PC signal (analog RGB) is selected and AUTO is
pressed.
• Off: The projector will not respond when AUTO is pressed.
Light Settings
• Light Mode: See Setting the Light Mode on page 43.
• Custom Brightness: Adjusts the light power manually.
• Constant Brightenss: Auto adjusts the light power to keep the 80% brightness.
• Light Usage Time: Displays the number of hours the light has been used.