41 Menu operation
Information
Audio
Settings
• Mute: Temporarily turns off the sound.
• Volume: Adjusts the sound level.
• Microphone Volume: Adjusts the microphone volume of the projector.
• Power On/Off Ring Tone: Turns on or off the ring tone when the projector is
in startup and shutdown process.
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power On/Off Ring Tone.
Closed
Caption
• Closed Caption Enable: Activates the function by selecting On when the
selected input signal carries closed captions.
Captions: An on-screen display of the dialogue, narration, and sound effects of TV programs and
videos that are closed captioned (usually marked as "CC" in TV listings).
• Caption Version: Selects a preferred closed captioning mode. To view captions,
select CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language
in your area).
Factory
Default
Returns all settings to the factory preset values.
The following settings will still remain: 2D Keystone, Corner Fit, Projector Installation, Light
Usage Time, Security Settings, Baud Rate, QUICK INSTALL, High Altitude Mode, Fan
Speed Mode, HDMI Equalizer.
Reset System
Returns all of the adjustments you’ve made for the System menu to the factory
preset values.
Information
• Native Resolution: Shows the native resolution of the projector.
• Detected Resolution: Shows the native resolution of the input signal.
• Source: Shows the current signal source.
• Picture Mode: Shows the selected mode in the Picture menu.
• Light Mode: Shows the selected mode in the Light Settings menu.
• 3D Format: Shows the current 3D mode.
• Color System: Shows input system format.
• Light Usage Time: Shows the number of hours the light source has been used.
• Firmware Version: Shows the firmware version of your projector.
To Next Page
