BenQ M33 - Connecting to Tv

64
5.2 Connecting to TV
You can play files in your digital video camera on a TV using an HDMI
cable.
1. Turn on the digital video camera.
2. Open the USB/HDMI
connector cover.
3. Connect one end of the
HDMI cable to the
digital video camera.
4. Connect the other end
of the HDMI cable to an
HDMI TV.
5. Turn on the TV, and then switch the input source of the TV to
“HDMI”.
6. Follow the on-screen instructions to operate the device via the TV.
Note:
The synchronized output depends on the current digital video camera mode (Video or Camera).
These two modes cannot be switched.
In HDMI mode, you cannot use the digital video camera to record videos, capture photos, utilize
the digital zoom function, or playback videos in slow motion.
Be sure to turn the digital video camera on before connecting to a TV using an HDMI cable.