BenQ MX604 - Page 35

35 Menu operation
Information
Factory
Default
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Projector Installation, Lamp Timer, High
Altitude Mode, Security Settings, Baud Rate, HDMI Equalizer.
Reset System
Returns all of the adjustments you’ve made for the System menu to the factory
preset values.
Information
• Native Resolution: Shows the native resolution of the projector.
• Detected Resolution: Shows the native resolution of the input signal.
• Source: Shows the current signal source.
• Picture Mode: Shows the selected mode in the Picture menu.
• Lamp Mode: Shows the selected mode in the Lamp Settings menu.
• 3D Format: Shows the current 3D mode.
• Color System: Shows input system format.
• Lamp Usage Time: Shows the number of hours the lamp has been used.
• Firmware Version: Shows the firmware version of your projector.