Operation30
Correcting Keystone
Keystoning refers to the situation where the projected image is noticeably wider at either
the top or bottom. It occurs when the projector is not perpendicular to the screen.
• Using the remote control
Press / on the projector or
KEYSTONE on the remote control to display
the Keystone correction page. Press to
correct keystoning at the top of the image.
Press to correct keystoning at the bottom
of the image.
•Using the OSD menu
1. Press MENU and then press ◄/► until the
Display menu is highlighted.
2. Press ▼ to highlight Keystone and press ENTER. The Keystone correction page
displays.
3. Press ▼ to correct keystoning at the top of the image or press ▲ to correct
keystoning at the bottom of the image.
To Next Page
Loading...
