BenQ PX9210 - Picture Mode; Color System

Operation60
The Information menu shows you the current operating status of the projector.
6. Information menu
Current
System Status
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the Picture menu.
Lamp Mode
Shows the current lamp mode.
Resolution
Shows the native resolution of the input signal.
3D Format
Shows the current 3D mode.
Color System
Shows input system format, NTSC, PAL, SECAM or RGB.
Lamp Usage Time
Displays the number of hours the lamp has been used.
Projector ID
Shows the selected projector ID in the System Setup: Advanced
menu.
Firmware Version
Displays the firmware version of the projector.
FUNCTION DESCRIPTION