2English
Maintenance and Troubleshooting
• Turn off the lamp first, and unplug the lamp from the USB port. Wipe any smears or dusts off
the lamp’s outer casing using a soft, lint-free cloth lightly moistened with a mild detergent
solvent. Do not use alcohol or any other chemical solvents like kerosene, naphtha and so on, as
the lamp’s casing may become damaged.
• Do not rinse the lamp or any of its components directly with water.
• If the lamp does not turn on, check to make sure that there are no loose connections between
the USB cable and USB ports.
• If the lamp does not turn on and the Auto Dimmer Mode indicator keeps blinking, the lamp is
being supplied with insufficient power voltage. Connect the lamp to another USB port that
provides 5V output voltage to solve this problem.
• If the problem persists, please contact the original place of purchase for help.
Specifications
Adjusting Color Temperature
When the lamp is on, press the Color temperature/Brightness
selection button on the controller. When the Color temperature
adjustment indicator lights up, turn the knob clockwise to
increase color temperature, or counter-clockwise to decrease it.
You can select from 8 color temperature settings: 6500K
(daylight), 5700K (cool white), 5000K, 4500K (neutral white),
4000K, 3500K (warm white), 3000K and 2700K (soft white).
• The brightness and color temperature settings will be
memorized automatically.
• If power supply to the lamp is interrupted unexpectedly, the
lamp will resume the last used brightness and color
temperature settings upon the recovery of power supply.
Model AR17
DC power input 5V, 1A
Max. power consumption 5W
Dimensions 450 x 90 x 92 mm (Width x Depth x Height)
To Next Page
Loading...
Need help?
General
