BenQ SW320 - Page 52

52 Navigating the main menu
PIP/PBP
Source
Sets the second video source for the PIP/PBP mode. (SW320)
• HDMI
• DP
• Mini DP
(SW271)
• HDMI-1
• HDMI-2
• DP
• USB-C
PIP Size Determines the size of the inset window in the PIP mode. • Small
• Medium
• Large
H. Position Adjusts the horizontal position of the inset window in the PIP
mode.
0~100
V. Position Adjusts the vertical position of the inset window in the PIP
mode.
0~100
Color
Gamut
Reproduces the color gamut set by specified standards of the
inset window in PBP mode.
• Adobe RGB
• sRGB
• Rec. 709
• DCI-P3
Gamma Adjusts the tone luminance of the inset window in PBP mode. • 1.6
• 1.8
• 2.0
• 2.2
• 2.4
• 2.6
Color Temp. Applies a color tint (cool or warm) to the image of the inset
window in PBP mode. Color temperature is measured in K
(Kelvin) degrees. The display becomes reddish if the color
temperature is low, and becomes bluish if the color
temperature is high.
• 5000K
•
6500K
• 9300K
Contrast Adjusts the contrast of the inset window (sub window) in the
PIP/PBP mode.
0~100
Sharpness Adjusts the sharpness of the inset window (sub window) in
the PIP/PBP mode.
To adjust the contrast and the sharpness of the main source, go to
the
Color Adjustment menu. See page 46 for more information.
0~10
Item Function Range