BenQ T221W User Manual

1. The following frequency range is the working period. If the entered mode between below
period but not match the frequency of supported timing, display optimization would not be
assured. If the entered mode is out of the working period, the display will be blanking
(just show “INPUT SIGNAL OUT OF RANGE”) then go to power saving.
2. Basically, mode judgment is regardless the sync polarity except both or more modes that
are all belong to the supported timing list and could be judged by sync polarity only.
3. In the meantime, real entered frequency of the supported timing is not requested exactly.
4. Normalization of VGA card’ s deviation will be acceptable.
5. Horizontal Frequency
6. Vertical Frequency
- 8 -
Technical Features and Specifications
Interface Frequency
30 ~ 82KHz
56 ~ 76Hz
Net
Net
Tilt Angle
473.8(H)x296.1(V)mm
Analog
Digital
Operating
Condition
Storage
Condition
0.282(H)*0.282(V)mm
D-sub
DVI-D(Optional)
-5°~20°
About 4.9kg
About 510（W）x 424(H)x 202（D）mm
AC
Consumption
AC 100~240V, 50Hz/60Hz,1.5A
Temperature
Humidity
Altitude
Temperature
Humidity
Altitude
Active:<55W/Standby:<2W
5°C to 40°C
-20°C to 60°C
20% to 80% (No Condensation)
Under 10,000 fts
5% to 80% (No Condensation)
Under 40,000 fts
Item
Description
Panel
Display Size
Pixel Pitch
Connector
Tilt
Weight
Power
Dimensions
(W x H x D)

BenQ T221W Specifications

General

Brand	BenQ
Model	T221W
Category	Monitor
Language	English