What to do if my BenQ T52WA Monitor says 'No Signal Detected'?
If your BenQ Monitor displays a 'No Signal Detected!' message, ensure the signal cable is securely connected to both the monitor and your PC's graphics port. Also, verify that your PC is turned on.
How to fix a blurred image on a BenQ T52WA?
If the image on your BenQ Monitor appears blurred, check the brightness and contrast settings. You may also need to adjust the sharpness setting.
How to fix a blank screen on a BenQ T52WA when the power indicator is off?
If your BenQ Monitor's screen is blank and the power indicator is off, ensure the power cable is properly connected. Also, make sure you have turned on the monitor using the power switch.
Why is the power indicator light orange on my BenQ T52WA Monitor?
If the power indicator light on your BenQ Monitor is orange, it may be in power-saving mode. Try pressing any key on your keyboard or moving the mouse to wake it up.
What to do if the power indicator on my BenQ T52WA is green, but there is no display?
If the power indicator light on your BenQ Monitor is green but the screen is blank, a screen saver may have activated. Press any key on your keyboard or move the mouse.
What to do if the image on my BenQ Monitor is displaced?
If the image on your BenQ Monitor appears normal but is off-center, you can adjust it using the OSD functions.
Connect the signal cable from the monitor to the PC's graphics port for display output.
Connect the monitor's power cord to a grounded electrical outlet for operation.
Details the purpose and function of each physical button and indicator light on the monitor unit.
Provides a visual guide and explanation for each icon found within the monitor's On-Screen Display (OSD) menu.
General| Pixel pitch | 0.258 x 0.258 mm |
|---|---|
| Response time | 8 ms |
| Display diagonal | 15.4 \ |
| Display resolution | 1280 x 720 pixels |
| Contrast ratio (typical) | 400:1 |
| Viewing angle, horizontal | 45 ° |
| Digital vertical frequency | 56 - 75 Hz |
| Digital horizontal frequency | 31 - 64 kHz |
| Display brightness (typical) | 200 cd/m² |
| Display viewable area (HxV) | 332.16 x 186.84 mm |
| Monitor maximum video bandwidth | 135 MHz |
| DVI-I ports quantity | 0 |
| Certification | TCO'99 |
| Product color | Black |
| Market positioning | - |
| LED indicators | Stand-by |
| Tilt angle range | -5 - 20 ° |
| Panel mounting interface | 100 x 100 mm |
| Power consumption (typical) | 21 W |
Weight and Dimensions| Depth (without stand) | 137.1 mm |
|---|---|
| Width (without stand) | 370.3 mm |
| Height (without stand) | 330.4 mm |
| Weight (without stand) | 2500 g |
To Next Page
