7 Troubleshooting
4. Troubleshooting
Symptom Remedy
*Blank Screen*
Power indicator is off
• Make sure the power cable is connected properly (see
Installation on page 4).
• Make sure that the monitor was turned on using the
power switch (see To connect the monitor to your PC
on page 4
).
Power indicator lights orange
• Perhaps a power saving mode is active? Press any key
on your keyboard or move the mouse.
Power indicator lights green
• A screen saver may have activated automatically after a
certain period of inactivity. Press any key on your key-
board or move the mouse.
"No Signal Detected!" message
• Is the signal cable connected to the monitor and the
PC's graphics port (see
Installation on page 4)?
• Is the PC turned on (see your PC's documentation)?
*Display Problems*
Image is displaced to the left/right
or to the top/bottom
• If the image appears normal but off-center, you can
adjust it using the OSD functions. For further informa-
tion, see "Auto Adjust" in the OSD icon list section.
Image is blurred
• Check brightness and contrast settings (see "Lumi-
nance" in the OSD icon list section).
• Check the sharpness setting (see "Sharpness" in the
OSD icon list section).
Color problems
• If the colors are off (e.g., white is not really displayed as
white etc.), you should adjust the color temperature
(see "Color" in the
OSD icon list section).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
