BenQ T52WA User Manual

4 Installation
2. Installation
To connect the monitor to your PC
1. Make sure that the PC and monitor are unplugged.
2. Connect the signal cable to the monitor and the PC.
To connect the monitor to the power source
Connect the separate power cable to the monitor and a grounded outlet.

BenQ T52WA Specifications

General

Pixel pitch	0.258 x 0.258 mm
Response time	8 ms
Display diagonal	15.4 \
Display resolution	1280 x 720 pixels
Contrast ratio (typical)	400:1
Viewing angle, horizontal	45 °
Digital vertical frequency	56 - 75 Hz
Digital horizontal frequency	31 - 64 kHz
Display brightness (typical)	200 cd/m²
Display viewable area (HxV)	332.16 x 186.84 mm
Monitor maximum video bandwidth	135 MHz
DVI-I ports quantity	0
Certification	TCO'99
Product color	Black
Market positioning	-
LED indicators	Stand-by
Tilt angle range	-5 - 20 °
Panel mounting interface	100 x 100 mm
Power consumption (typical)	21 W

Weight and Dimensions

Depth (without stand)	137.1 mm
Width (without stand)	370.3 mm
Height (without stand)	330.4 mm
Weight (without stand)	2500 g