BenQ TH670 - Specifications and Warranty; Technical Specifications

Specifications
70
Specifications
All specifications are subject to change without notice.
Lamp life results will vary depending on environmental conditions and usage.
Optical
Resolution
1920x1080, 1080p
Display system
1-CHIP DMD
Lens F/Number
F= 2.55~2.79
f= 22.3mm~26.76mm
Offset
116%
Zoom ratio
1.2X
Lamp
210W
Electrical
Power supply
AC100–240V, 2.90 A,
50-60 Hz (Automatic)
Power consumption
270 W (Max.); < 0.5 W (Standby)
Mechanical
Weight
3.0 kg (6.6 lbs.)
Output terminals
Speaker
(Stereo) 10 watt x 1
Audio signal output
PC audio jack x 1
Control
IR receiver x 1 (front)
RS-232 serial control
9 pin x 1
USB
Mini B
Supports firmware upgrade
Type A
1.5A output
Input terminals
Computer input
RGB input
D-Sub 15-pin (female) x 2
Video signal input
VIDEO
RCA jack x 1
SD/HDTV signal input
Analog - Component RCA jack x 3
(through RGB input)
Digital-HDMI x 1
Audio signal input
PC audio jack x 1 for audio input
PC audio jack x 1 for microphone audio
input
RCA audio jack (L/R) x 2
Environmental Requirements
Operating temperature
0°C-40°C at sea level
Operating relative humidity
10%-90% (without condensation)
Operating altitude
0-1499 m at 0°C-35°C
1500-3000 m at 0°C-30°C (with High
Altitude Mode on)