BenQ V2410T User Manual

11 Getting the most from your BenQ monitor
How to install the monitor on a new computer
This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver
software on a new computer which has never had a monitor driver installed before. This
instruction is only suitable for a computer which has never been used before, and for which the
BenQ LCD Monitor is the first ever monitor to be connected to it.
If you are adding the BenQ LCD Monitor to an existing computer that has already had another monitor
connected to it (and has monitor driver software installed), you should not be following these instructions.
You should instead be following the instructions for How to upgrade the monitor on an existing computer.
1. Follow the instructions in How to assemble your monitor hardware on page 6.
When Windows starts, it will automatically detect the new monitor and launch the Found New
Hardware Wizard. Follow the prompts until it displays the option to install hardware device drivers.
2. Check Search for the best driver in these locations option, and check the option for the
correct location of the driver files.
3. Locate the driver files and click
Next.
4. Click
Finish.
5. Restart the computer.

BenQ V2410T Specifications

General

Brand	BenQ
Model	V2410T
Category	Monitor
Language	English