7 How to assemble your monitor hardware
Rotating the monitor (optional)
4. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button.
Turn on the computer too, and follow the instructions in
Section 4:
Getting the most from your BenQ monitor
on page 10 to install the monitor software.
1. Fully extend the monitor and tilt it.
Gently lift the display up and extend the stand to the maxi-
mum extended position.
The stand should be vertically extended to allow the
monitor to rotate from landscape to portrait mode.
To Next Page
Loading...
Need help?
General
