BenQ VM2221 - Page 94

13
d-c. Cool
adjustment
9300ْk
PC or Pattern
Generator
Full white picture
1697 1280*800/60Hz
1997 1440*900/60Hz
2297/2097
1680*1050/60Hz
1. Press MENU Key to open OSD.
2. Choose Picture.
3. Press CH▲▼Key to select Color
temp.
4. Press VOL▲ Key to enter
5. Press VOL▲ Key to choose Cool.
6. Put R.G.B three colors values
,to make white picture warm temperature
for
1997/2097/2297
x:283 y:297 Y:270±10%cd/m
2
1697
x:283 y:297 Y:180±10%cd/m
2
3.3 Option setup
PC or Pattern
Generator
Opposite white checks
screen
1697 1280*800/60Hz
1997 1440*900/60Hz
2297/2097
1680*1050/60Hz
1. Press MENU to open OSD.
2. Press VOL▲▼Key to select OSD
Setup.
3. After accomplished ,select MENU to
exit
a. Language
setup
Audio Language
setup
Subtitle Language
setup
PC or Pattern
Generator
Preset mode 1. Press CH▲▼Key to Select
Language.
2. Press VOL▲▼Key set upon clients
requirements. Default is English.
b. Time Out setup
PC or Pattern
Generator
Preset mode 1. Press CH▲▼Key To Select Time Out.
2. Press VOL▲▼Key set upon clients
requirements Default is 15 s.
4. YPBPR
adjustment
(factory mode)
FLUKE 54200
Full polychrome
color bar 100_0
1. Press Source Key to enter OSD.
2. Press CH▲▼Key to select YPBPR .
3. Press▲ Key to enter
4. Then select MENU to exit