How to fix BenQ x3100i Projector that does not turn on?
If your BenQ Projector isn't turning on, first ensure the power cord is securely plugged into both the projector's AC power jack and a working power outlet, and that the outlet switch is on. Also, if the projector is cooling down, wait for the process to complete before attempting to turn it on again.
What to do if there is no picture on BenQ x3100i?
If you see no picture on your BenQ Projector, make sure the video source is turned on and correctly connected. Verify the projector is correctly connected to the input signal device and that you've selected the correct input signal using the (SOURCE) key.
Why is BenQ x3100i Projector remote control not working?
If the remote control for your BenQ Projector isn't working, begin by replacing both batteries with new ones. Ensure there are no obstacles between the remote and the projector. Finally, make sure you are within 8 meters (26 feet) of the projector.
How to fix blurred image on BenQ x3100i?
If your BenQ Projector image is blurred, try adjusting the focus of the lens using the focus ring. If that doesn't sharpen the image, adjust the projection angle, direction, and height of the projector to properly align it with the screen.
Step-by-step guide for installing the QS02 HDMI Media Streaming dongle.
Recommendations and precautions for securely mounting the projector.
Guide to correcting distorted projected images using keystone correction.
Step-by-step guide to power on the projector and initial setup.
Guide to setting and managing projector password protection.
Steps to follow if the projector password is forgotten.
Corrects image distortion when the projector is not perfectly aligned.
Manages password protection and panel key lock features.
Solutions for issues when the projector fails to power on.
Troubleshooting steps for when no image is displayed.
Remedies for a projected image that appears out of focus.
Solutions for problems with the projector's remote control.
General| Number of colors | 1.07 billion colors |
|---|---|
| Native aspect ratio | 16:9 |
| Vertical scan range | 20 - 240 Hz |
| Horizontal scan range | 15 - 135 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | 600000:1 |
| Screen size compatibility | - \ |
| Projector native resolution | 2160p (3840x2160) |
| RMS rated power | 10 W |
| Number of built-in speakers | 2 |
| Product type | - |
| Product color | Black |
| Market positioning | Gaming |
| Built-in display | No |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 330 W |
| Light source type | LED |
| Service life of light source | 20000 h |
| Service life of light source (economic mode) | 30000 h |
| Offset | 110 % |
| Throw ratio | 1.15 - 1.5 |
| Focal length range | 17.02 - 22.21 mm |
| Aperture range (F-F) | 1.8 - 2.25 |
| Vertical lens shift range | 40 - 60 % |
| Supported graphics resolutions | 640 x 480 (VGA), 3860 x 2160 |
| HDMI connector type | Full-size |
| HDMI ports quantity | 3 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 1 |
| VGA (D-Sub) ports quantity | 0 |
| Operating temperature (T-T) | 0 - 40 °C |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
| Bluetooth version | 5.0 |
| Noise level | 32 dB |
| Noise level (economic mode) | 28 dB |
| Security updates end date | 31/12/2026 |
Weight and Dimensions| Depth | 213 mm |
|---|---|
| Width | 272 mm |
| Height | 259 mm |
| Weight | 6800 g |
To Next Page
