Need help?Do you have a question about the BenQ MS612ST and is the answer not in the manual?
General| Number of colors | 1.073 billion colors |
|---|---|
| Projection distance | - m |
| Vertical scan range | 23 - 120 Hz |
| Horizontal scan range | 31 - 99 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | 5000:1 |
| Screen size compatibility | 27 - 300 \ |
| Projector native resolution | SVGA (800x600) |
| Keystone correction, vertical | ± 40 ° |
| Throw ratio | 0.9 - 1.08:1 |
| Digital zoom | 2 x |
| Focal length range | 10.2 - 12.24 mm |
| Resolution | 1600 x 1200 pixels |
| Aspect ratio | 4:3, 16:9 |
| RS-232 ports | 1 |
| Power supply type | AC |
| Dimensions (WxDxH) | 311 x 104 x 244 mm |
| Power requirements | 100 - 240V |
| 3D | Yes |
| Analog signal format system | NTSC, PAL, SECAM |
| Lamp power | 190 W |
| Light source type | Lamp |
| Service life of light source | 4500 h |
| Service life of light source (economic mode) | 6000 h |
| RMS rated power | 10 W |
| DVI port | No |
| Audio (L/R) in | 2 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Component video (YPbPr/YCbCr) in | 0 |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 275 W |
| Noise level | 29 dB |
Weight and Dimensions| Weight | 2500 g |
|---|
Critical safety advice covering eye protection, servicing, voltage, lens obstruction, and manual reading.
Safety measures for lamps, internal components, product placement, and ventilation.
Guidelines on operating environments, surface stability, and avoiding vertical placement.
Safety advice on physical handling, ceiling mounting, lamp disposal, and earthing.
Guidance on selecting the best location for projector installation (table, ceiling).
Instructions for connecting various signal sources using different cables.
Procedure for powering on the projector, including initial setup steps like language selection.
Steps to activate and set a password for projector security and prevent unauthorized use.
How to select input sources and adjust color space settings for optimal display.
Methods for controlling the projector remotely via LAN, web browser, and wireless connection.
Procedures for safely powering down the projector and understanding direct power off.
How to check lamp hours and extend lamp life through specific settings.
Indicators and messages that signal the need for lamp replacement.
Safety precautions and detailed steps for replacing the projector lamp.
Final steps for lamp replacement, including securing the lamp and cover.
Instructions on how to reset the lamp timer after a lamp replacement.
Addresses issues like no power, no picture, blurred image, remote control, and password errors.
To Next Page
