15 How to assemble your monitor hardware
How to detach the stand and the base
1. Prepare the monitor and area.
Turn off the monitor and the power before
unplugging the power cable. Turn off the computer
before unplugging the monitor signal cable.
Protect the monitor and screen by clearing a flat
open area on your desk and placing a soft item like
a towel on the desk for padding, before laying the
screen face down on a flat clean padded surface.
Please be careful to prevent damage to the monitor. Placing
the screen surface on an object like a stapler or a mouse will
crack the glass or damage the LCD substrate voiding your
warranty. Sliding or scraping the monitor around on your
desk will scratch or damage the monitor surround and
controls.
2. Remove the monitor stand.
While pressing and holding the VESA mount
release button ( ), detach the stand from the
monitor ( and ).
3. Remove the monitor base.
Align the arrow on the bottom of the stand with
the one on the monitor stand. Raise the
thumbscrew lid ( ) and release the thumbscrew
as illustrated ( ).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
