BV200 Plasma Viscometer Mk2/3 Customer User
Manual
Issue 9
th
Sep 2020 - Rev 1.8 Page 32 of 53
Follow the on-screen instructions to check and clean the waste bottle cap with a cloth 6.
soaked in laboratory sterilisation fluid. Some staining of the rubber seal is normal and
acceptable.
a. When completed select “Click to Proceed”
Follow the on-screen instructions and add any additional notes 7.
a. When complete select “Click to Finish”. The viscometer will then start the
decontamination clean process
To Next Page
Loading...