Need help?Do you have a question about the Bentel FireClass FC500 and is the answer not in the manual?
General| Number of Zones | 8 |
|---|---|
| Input Voltage | 230V AC |
| Frequency | 50/60 Hz |
| Backup Battery | 2 x 12V/7Ah |
| Sounder circuits | 2 |
| Number of Outputs | 4 |
| Dimensions | 400 x 300 x 100 mm |
| Enclosure Protection | IP30 |
| Humidity | Up to 95% non-condensing |
Explains the function of alphanumeric, cursor, ESC, ENTER, and function keys.
Details access levels L1 (Viewing) and L2 (Operation) for panel management.
Detailed description of each LED's function and status indication.
Describes the function of Lamp/Buzz/Test, Silence, Investigate, Reset, and Evacuate keys.
Explains the display interface and key functions during Standby status.
Describes how the panel displays Warning status and its causes.
Details the Prealarm status display, including zones, causes, and times.
Guide to viewing various parameters like Loop, Device, SW Zone, Output, Network, Telecom, Option, Log.
Instructions on how to view stored events and filter them by type.
To Next Page
